-40%
Agilent HP E1355A 8-Channel 120 Ohm Strain Relay Multiplexer
$ 41.97
- Description
- Size Guide
Description
Keysight / Agilent HP E1355A 8-Channel 120 Ohm Strain Relay Multiplexer8-Channel 120 Ω Strain Relay Multiplexer HP E1355A
Features
8-Channel 120 Ω strain gage relay multiplexer
Strain gage measurements with bridge completion
+ 5 V excitation circuitry—quarter, half, and full bridge
Strain, voltage, current, and Ω measurements
Automatic conversions for bridge configurations
Description
The HP E1355A 120 Ω Strain Relay Multiplexer is a B-size, 1-slot, register-based VXI module. This relay multiplexer provides bridge completion and excitation voltage circuitry for up to eight channels. The multiplexer module consists of a B-size component card (labeled E1345-66201) and a screw terminal block that plugs onto the component card. The HP E1355A is functionally similar to the HP E1345A, E1347A, and E1356A.
You can perform strain gage measurements with automatic conversions to engineering units on multiple multiplexer channels by sending SCPI commands to the DMMs, HP E1326B or E1411B. Strain measurements supported in SCPI with these HP DMMs are quarter, bending half/full, poisson half/full, and bending poisson full.
Diagnostics for the HP E1355A include Tension Shunt, Compression Shunt, Leadwire Resistance, Internal Half Bridge Voltage, Guard Voltage and Bridge Excitation Voltage.
Refer to the HP Website for instrument driver availability and downloading instructions, as well as for
recent product updates, if applicable.
CONDITION:
Used. Cleaned. Very Good Condition