-40%
Carbon Fiber Tube Plain Weave 0.31 x 0.37 x 35.5 inch (listed 8-29-19)
Carbon Fiber Tube Plain Weave 0.31 x 0.37 x 35.5 inch (listed 8-29-19)
Carbon Fiber Tube Plain Weave 0.31 x 0.37 x 35.5 inch (listed 8-29-19)

Carbon Fiber Tube Plain Weave 0.31 x 0.37 x 35.5 inch (listed 8-29-19)

$ 5.28

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: New
  • Tube Exterior: Plain Weave

    Description

    Carbon Fiber Tube
    All Product Made in the U.S.A.
    Size
    Inner Diameter x Outer Diameter x Length
    Listed in inches
    To convert inches into mm, multiply inches by 25.4
    Strength & Weight
    Carbon Fiber is about 1.4 times stiffer than aluminum and weighs 1/3 less
    Fabric
    Looks dark black, has a woven exterior (traditional Carbon Fiber look) and is glossy – texture has cello lines (textured ribbing)
    Sanded version retains the woven exterior, looks grey in color, matte and is paint / bond ready – texture is smooth
    Comprised of various angle plies throughout the layup with the outer (and sometimes inner ply) being a woven carbon fiber fabric either plain weave (checkerboard pattern) or twill (diagonal bias pattern)
    IN GENERAL tubes listed as "Fabric" are comprised of ~65% (0) degree unidirectional plies = Good bending stiffness & ~25% (90) or (+45/-45) degree Multi-directional plies = Good torque resistance & crushing strength & ~10% (0/90) weave for the outermost layer = Good looks and provides good strength guarding against damage
    Uni
    Looks solid dark black and is glossy – texture has cello lines (textured ribbing)
    Sanded version looks solid grey in color, matte and is paint / bond ready – texture is smooth
    Also comprised of various angle plies throughout the layup with the outer ply being a unidirectional layer of Carbon Fiber
    IN GENERAL tubes listed as "Uni" are comprised of ~70% (0) degree unidirectional plies = Good bending stiffness & ~30% (90) or (+45/-45) degree Multi-directional plies = Good torque resistance & crushing strength
    Filament Wound
    Looks vary quite a bit though generally these tubes have a “delta” “large thread weave” pattern to them, glossy – texture has cello lines (textured ribbing)
    Sanded version looks grey in color, sometimes takes on a “camo” type look, matte and is paint / bond ready – texture is smooth
    Comprised of purely angled plies of carbon fiber – Fiber angles vary from ~15 to ~80 degrees
    Thank you for checking out our products!
    --