Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
SLIGHTLY USED TESTED TO BE PERFECTLY FUNCTIONAL,IN GOOD COSMETIC CONDITION MAY HAVE MINOR SCRATCHES
Warranty:
1 YEAR AUDIOSAVINGS
Product Description
Video of RPA16:
Power Ratings:
RMS Power Output:
Stereo 8 Ohm: 2 x 1,000W
Stereo 4 Ohm: 2 x 1,500W
Bridged 8 Ohm: 1 x 3000W
Peak Power Output:
Stereo 4 Ohm: 2 x 5,000W Max
Bridged 8 Ohm: 1 x 10,000W Max
​​
Terminals:
Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
Output Terminals:
Banana binding post speaker output
Speak on output
XLR output to connect another amplifier or powered sub
​Features:
Rockville RPA16 10,000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
LCD displays volume in dB per channel and operating temperature
2U rack space
Built in limiter protects your speakers from distortion and clipping
Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in variable high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (25A, 250V)
Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz – 30 Khz
THD + Noise @ 1Khz full power: <0.04%
Input Impedance: 10K Ohm Balanced
Input signal voltage: 660mV – 1.5V
Input sensitivity: 0.7v
Damping factor: ( 100Hz, 10w, 4 ohms): 36.5
Damping factor: (1Khz @ 8 ohm): >400:1
Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
Output impedance at speaker terminals: 0.10975 Ohms
Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%
Signal to Noise Ratio: > 100dB
IMD 60Hz & 1kHz, 4:1: <0.04%
SLEW RATE (input filter limited) : 40v/uS
Power Requirements: 120V / 50-60Hz
Weight: 40.8 lbs
Dimensions: 19.09 x 16.93 x 3.35 inch
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: RPA16 U
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design